Solco Pyrolecandrsquo;s Smart ECO is an easy-to-use electronic thermostat. The air/surface sensing thermostat is designed to provide user-friendly measurement and control of heating cables. The versatile temperature controller has high accuracy, suitable for trace heating applications. The settings of the electronic thermostat can be programmed easily.nnThe electronic thermostat is designed to provide cost-effective and accurate On/Off control over trace heating circuits and fault monitoring and feedback via a BMS safety relay. It has features like an alarm relay output – one can set both high and low-temperature alarms, process parameters and setpoints are adjusted by the membrane keypad. It is a sleek modern thermostat with a clean and easy to read display and push-button controls. The electronic thermostat is easy to use and enables monitoring along with control from anywhere.nnProduct Specifications:nnnTemperature setting range: -20 anddeg;C to +99 anddeg;CnControl Method: On/OffnMax. Load Current: 20AnnnKey Features:nnnUser friendly – settings can be programmed easily.nThe display alternates between live temperature reading and set temperature once a minute.nCan be used in ordinary/non-hazardous areas.nAir or surface sensing applications between -20 anddeg;C to +99 anddeg;C in non-hazardous areas.nCE approved.nThe electronic thermostat is cost-effectivenThe Smart-ECO thermostat is supplied with an NTC thermistor type sensor probe. This has a 3m long cable giving freedom to locate the electronics remotely from the sensor.nThe thermostat has a 20A control relay and a 3A SPST BMS fault alarm relay.nUnits can be mounted on a pipe using a Solco Pyrolec support bracket and are designed to work easily with Solco Pyrolec heating cable termination kits.nnnApplications:nnnProvides user-friendly measurement and control for Solco Pyrolec heating cables.nIt is designed to provide cost-effective and accurate On/Off control over trace heating circuits and fault monitoring and feedback via a BMS safety relay.nnnProduct Details:nnnRated Voltage:100Vac (min) andndash; 270Vac (max), 50/60 HznAmbient Temperature: -20 anddeg;C to +60 anddeg;CnTemperature Sensor Type: 3m NTC Thermistor, max. exposure temperature 200 anddeg;CnEnclosure Material: ABS Base, Polycarbonate Transparent LidnEnclosure dimensions: 125mm x 175mm x 75mmnNo. of Terminals (Rated Cross Section): 14 x 2.5 mmandsup2;nn
Sold By: Buy Insulation Online